ACV SMART E130 HOT WATER TANK IN TANK CYLINDER (POA) PLEASE CALL FOR PRICE.
Fast recovery floor standing Tank-in-Tank Cylinder - standard 3kW immersion, perfect partner to condensing boilers.
EXCEPTIONAL REHEAT TIME OF 9 MINUTES.
- 3.5Bar Mains water Systempak and DHW mixing valve supplied as standard
- 3kW Immersion heater as standard - 6kW option available
- 6 pin plug-and-play electrical connection, S Plan or Y Plan
- Low Heat Loss - 50mm Polyurethane insulation
- Thick polyurethane jacket. hard wearing and shock resistant.
- Stainless steel domestic cylinder - 25 Year guarantee
- Anti-Legionella : Storage temperature > 60°C.
- Tank-in-Tank Technology
|Heating surface DHW tank||1,03||m²|
|Capacity (domestic hot water)||75||L|
|Connection - primary||1 F||inches|
|Connection - DHW||3/4 M||inches|
|Connection - re-circulation / safety valve||3/4 M||inches|
|Connection - heating element||6/4 F||inches|
|Primary flow (ΔT10K) do not use||2100||L/h|
|Pressure drop (primary - ΔT10K)||17||mbar|
|Max operating temperature||90||°C|
|Max operating pressure (DHW)||8,6||bar|
|Max operating pressure heating (primary)||3||bar|
Hot water performancesPeak flow at 40°C
236 L/10’ Peak flow 1st hour at 40°C 784 L/60’ Continuous flow at 40°C 658 L/h Peak flow 1st hour at 45°C 672 L/60’ Continuous flow at 45°C 564 L/h Peak flow at 60°C 117 L/10’ Peak flow 1st hour at 60°C 384 L/60’ Continuous flow at 60°C 320 L/h Pre-heating time from 10 to 80°C (Heat source: boiler) 22 min Heating time from 10 to 60°C - 6 kW (3 kW) 78 (157) min Max absorbed heat (Heat source: boiler) 23 kW Voltage 230 V Max design pressure (DHW) 10 bar